BKYRC - AKI-16 INDICATOR 14.7 OZ (ACID TEST KIT)

  • MSDS: BKYRC
  • Manufacturer: SPORLAN VALVE CO
  • Product Name: AKI-16 INDICATOR 14.7 OZ (ACID TEST KIT)
  • National Stock Number: 6665-01-020-3508
Product Identification

Product ID:AKI-16 INDICATOR 14.7 OZ (ACID TEST KIT)
MSDS Date:05/28/1991
FSC:6665
NIIN:01-020-3508
MSDS Number: BKYRC

Responsible Party
SPORLAN VALVE CO
7525 SUSSEX AVE
ST LOUIS, MO 63143
US

Emergency Phone: 314-647-2775

Info Phone: 314-647-2775

Preparer: JOHN E. HOFFMAN

Cage: 78462

Contractor
SPORLAN VALVE COMPANY
ST LOUIS, MO 63143

Telephone: 314-647-2775

Cage: 78462

Ingredients

XYLENE, DIMETHYLBENZENE, XYLOL

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 62%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ETHANOL (ETHYL ALCOHOL), TECSOL, ALCOHOL

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 36%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM


TOLUENE

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 2%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PHENOL RED, PHENOLSULFONEPTHALEIN

CAS: 143-74-8

RTECS: SJ7490000

Fraction By Weight: TRACE

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
IRRITATION, HEADACHE, DIZZINESS, & UNCONSCIOUSNESS. SKIN:
ABSORPTION.
Explanation of Carcinogenicity:NONE

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
VOMITING. EYES/SKIN: FLUSH W/WATER FOR 15 MINUTES. OBTAIN MEDICAL
ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:44F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUIDS. VAPORS OF THE SOLUTION
HAS A MODERATE EXPLOSION HAZARD WHEN EXPOSED TO HEAT OR FLAME.

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES. VENTILATE AREA. FLUSH
SMALL AMOUNTS W/WATER OR MOP UP. LARGE AMOUNTS MAY BE COLLECTED
W/ABSORBENT MATERIAL. AVOID INHALING VAPOR OR SKIN CONTACT.

Handling

Handling and Storage Precautions:DON'T STORE SOLUTIONS >120F. AVOID
INHALING VAPORS OR SKIN CONTACT.

Exposure Controls

Respiratory Protection:USE APPROVED RESPIRATOR
Ventilation:PROPERLY TO KEEP CONCENTRATION BELOW LOWEST TLV LIMIT
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GOGGLES
Supplemental Safety and Health
PRODUCT IS A ACID TEST KIT USED TO DETERMINE THE ACIDITY OF OIL FROM
AIR CONDITIONING & REFRIGERATION SYSTEMS.

Chemical Properties

Boiling Pt:B.P. Text:182F
Melt/Freeze Pt:M.P/F.P Text:-75F
Vapor Pres:40
Vapor Density: 2
Spec Gravity:0.833
pH:7
Solubility in Water:SLIGHT
Appearance and Odor:YELLOW-ORANGE-RED
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:HEAT, FLAME

Disposal

Waste Disposal Methods:COLLECT FOR INCINERATION IN ACCORDANCE
W/FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.